New Items

Refrigerant dryers are the most commonly used dryers in the industry and consist of an air-to-air heat exchanger and an air-to-refrigerant heat exchanger. The heat exchangers remove moisture from your compressed air by condensation of water within.This is essential to protect compressed air systems and every piece of equipment fed by compressed air from the harmful effects of moisture.

• Production Capacity: 10 per day
• Delivery Time: 1 week
• Packaging Details: box type

In some model disc plough is designed to operate as 2, 3 or 4 bottoms, by adding or removing sub beams the sub beam assemblies according to requirement. The disc angle ranges from 40-45⁰ to obtain the desired width of cut and the tilt angle ranges from 15-25 ⁰ for penetration.

Jet condenser is a condenser in which the condensate gets mixed with the cooling water. That’s
why it is also called as mixing type condenser.
This type of condenser is used sometime because it lost some of the condensate and requires high
power for the pump during the process of condensation.
In jet condenser, as the condensate is not free from the salt, so it cannot be used as feed water for
the boiler. It can be used at the place where sufficient amount of good quality water is available.

• Item Code: AEM-01
• Production Capacity: 1
• Delivery Time: 10 Days

Vibration underpins all matter in the Universe. The CymaScope is the first scientific instrument that can provide an analog image of sound and vibration. The once invisible world of sound is revealed in a myriad of geometric patterns.

Get Trend Tensiometer, 0.1 in Pune, Maharashtra at best price by Trend Innovations and more manufacturers with contact number

Compressed air dryers are special types of filter systems that are specifically designed to remove the water that is inherent in compressed air. The compression of air raises its temperature and concentrates atmospheric contaminants, primarily water vapor, as rsulting in air with elevated temperature and 100% relative humidity. As the compressed air cools down, water vapor condenses into the tank(s), pipes, hoses and tools connected downstream from the compressor which may be damaging. Therefore water vapor is removed from compressed air to prevent condensation from occurring and to prevent moisture from interfering in sensitive industrial processes.

A heat pump is a device that uses work to transfer heat from a cool space to a warm space by transferring thermal energy using a refrigeration cycle, cooling the cool space and warming the warm space. In cold weather a heat pump can move heat from the cool outdoors to warm a house; the pump may also be designed to move heat from the house to the warmer outdoors in warm weather. As they transfer heat rather than generating heat, they are more energy-efficient than other ways of heating a home.

This is for material test, izod and charpy test

Evaporative condensers (ECs) operate by rejecting condenser heat to a water sump that is cooled by the evaporation of water. They replace the fin-tube air-cooled condenser coil with a refrigerant-to-water copper heat exchanger that is evaporatively cooled.

The double ring infiltrometer is a simple instrument that is used to determine the rate of infiltration of water into the soil. The rate of infiltration is determined as the amount of water per surface area and time unit, that penetrates the soil.

The term 'moldboard plow' describes an implement that cuts soil, lifts it, and turns it at least partly upside down by means of a curved plate, or moldboard (Figure 1). The concept of the moldboard plow is quite ancient.